• Overall energy delivery: 1.2kW - 5kW
• Heat output: 1kW - 4.6kW
• Extra wide heat output range
• Intake duct: Ø75mm
• Outlet duct: Ø90mm (4xØ43mm/Ø75mm)
• Ultra low noise level
• Extra low el. consumption
• Fuel saving thermostat (cycling)
• Enhanced temperature stability
• Fixed power mode
• Water-resistant electronics
• Dual overheating sensor
• Brushless motor
• External ambient temp. sensor
• Bluetooth / iOS App (BETA)

Kit Includes:

1 x  Ambient Temperature Sensor 10k NTC

1 x Fuel Pump 65ml Type C with Dumper

1 x Fuel Pump Holder with Suspension Strip

1 x Fuel Filter Horizontal with Drain

1 x 1M Length of Fuel Hose Rigid - Nylon Blue ID-Ø 2mm / OD-Ø 5mm

1 x  4M Length of Fuel Hose Rigid - Nylon White ID-Ø 2mm / OD-Ø 4mm

1 x 300mm Length of Fuel Hose Flexible - Reinforced Rubber Black ID-Ø 4mm / OD-Ø 10.5mm

2 x Fuel Hose Sleeve - Reinforced Rubber Black ID-Ø 5mm / OD-Ø 10.8mm

4 x Fuel Hose Sleeve - Reinforced Rubber Black ID-Ø 4mm / OD-Ø 10mm

1 x Suction Pipe with Nut

2 x Air Vent / Inlet & Outlet Ø 90mm Type C

1 x Air Vent / Inlet & Outlet Ø 75mm Type C

1 x Y-Junction with Valve Ø 90mm

1 x 800m Length of Duct Hose Black Ø 75mm

1 x 2M Length of Duct Hose Ø 90mm

1 x Air Intake Foam Silencer with Cap Ø 25mm

1 x Air Intake Hose Black Ø 25mm

1 x Flexible Exhaust Pipe Ø 24mm

1 x Exhaust Silencer / Muffler - Offset Marine Ø 24mm MK2

1 x 1M Length of Fiberglass lagging / insulation sleeve for exhaust pipe

1 x Exhaust Through Hull / Skin Fitting Ø 24mm Type H

1 x Muffler Sealant 170gm J-B Weld

1 x Bottom plate MK2 Zinc Plated

1 x Bottom Plate L-Shaped Bracket (WALL)

1 x Mounting Bracket SS for Silencer

6 x Hose Clamp Ø 90mm (80-100mm)

2 x Hose Clamp Ø 75mm (70-90mm)

5 x Hose Clamp 27mm (26-28mm) Heavy Duty

2 x Hose Clamp Ø 24/25mm (19-29mm)

4 x Hose Clamp Ø 10mm (9-11mm)

8 x Hose Clamp Ø 9mm (8-10mm)

1 x Mounting Saddle for Air Intake Silencer Ø 55mm

2 x Hose / Pipe Saddle

1 x Mounting Saddle for Air Intake Hose Ø 27mm

12 x Cable Ties

1 x 15cm Straight Bracket